OEM 800367935 The XCMG Oil Filter (800367935) is a genuine OEM precision‑engineered filtration component designed for the high‑performance diesel engines powering XCMG articulated dump trucks. This advanced oil filter, identified by part number 800367935, ensures the continuous removal of abrasive contaminants, combustion by‑products, and metallic wear particles from the engine lubricating oil, delivering consistently clean oil flow, superior engine protection, and exceptional durability in the most demanding mining, quarrying, and heavy construction environments worldwide.
Manufactured with high‑efficiency micro‑glass or cellulose filter media, a robust steel housing, and integrated bypass valve technology, the 800367935 oil filter delivers consistent filtration efficiency (≥ 99% at 20 microns), excellent dirt‑holding capacity, and exceptional resistance to oil degradation, pressure pulsation, and temperature extremes (-40°C to +120°C). Its compact design and precision‑engineered sealing interface guarantee a perfect, leak‑free fit without modification.
The 800367935 oil filter features a high‑strength centre tube that prevents media collapse, a silicone anti‑drain back valve that ensures instant oil pressure upon startup, and a corrosion‑resistant housing finish, making it an essential component for maintaining engine oil cleanliness, preventing premature wear, and maximising uptime in your ADT fleet.
The 800367935 Oil Filter is manufactured with high‑efficiency micro‑glass or cellulose filter media, precision‑pleated to maximise filtration surface area and dirt‑holding capacity while minimising flow restriction across every unit.
Its advanced multi‑layer media construction captures abrasive contaminants as small as 20 microns with ≥ 99% efficiency, preventing them from circulating through the engine and causing wear to bearings, cylinder liners, and valve train components.
The integrated silicone anti‑drain back valve prevents oil from draining out of the filter when the engine is stopped, ensuring instant oil pressure and lubrication upon startup, reducing dry‑start wear.
The precision‑calibrated bypass valve opens at 2.5 bar to allow unfiltered oil flow during cold starts or when the filter becomes excessively clogged, ensuring that the engine always receives adequate oil supply.
The high‑strength steel housing with zinc‑phosphate and epoxy coating provides excellent corrosion resistance, ensuring the filter remains serviceable even in wet, chemically aggressive mining environments.
In demanding applications such as open‑pit mines, aggregate quarries, and heavy construction sites, the 800367935 delivers reliable, long‑lasting oil filtration for your ADT’s diesel engine.
The 800367935 oil filter is produced using advanced pleating, bonding, and assembly technologies, achieving tight tolerances on media pleat spacing, end‑cap adhesion, and bypass valve calibration.
The micro‑glass media is precisely pleated and heat‑bonded to the centre tube and end caps, ensuring uniform flow distribution and preventing media migration or bypass under high differential pressure.
The silicone anti‑drain back valve and nitrile rubber gasket are moulded to exacting specifications, providing a reliable seal that prevents oil leakage and ensures proper filter function.
After assembly, each filter undergoes 100% leak testing, burst pressure testing, and flow‑rate verification to ensure it meets the required performance standards.
Sample units from each production batch are subjected to multi‑pass filtration efficiency testing, dirt‑holding capacity testing, and burst pressure validation to confirm long‑term durability and performance.
All materials are RoHS compliant and free from hazardous substances, meeting stringent environmental standards.
Articulated dump trucks operate in some of the harshest environments on earth, with engine oil constantly exposed to combustion soot, metallic wear debris, and airborne dust infiltration, making effective oil filtration essential for engine longevity.
The 800367935 oil filter serves as the primary defence against oil‑borne contaminants, ensuring that the engine’s critical lubrication system receives clean, contaminant‑free oil at all times.
A substandard or clogged oil filter can allow abrasive particles to circulate through the engine, accelerating wear on bearings, piston rings, cylinder walls, and turbocharger components — risks that are eliminated by using genuine XCMG filters.
Field data from mining operations shows that ADTs equipped with genuine XCMG oil filters experience 40% fewer engine‑related failures and a 25% reduction in oil consumption, directly improving machine availability and lowering operating costs.
The filter’s high dirt‑holding capacity and efficient media design allow it to maintain low pressure drop throughout the service interval, ensuring that the engine’s oil pump does not have to work harder than necessary.
Regular replacement of the oil filter at the recommended service interval is essential; any filter showing signs of damage, excessive restriction, or media failure should be replaced promptly with genuine 800367935 components.
The 800367935 oil filter features a high‑efficiency synthetic micro‑glass media that provides exceptional particle capture efficiency while maintaining low flow resistance, ensuring optimal oil flow even under high‑load conditions.
The media’s three‑dimensional structure provides a high surface area for particle capture, with a dirt‑holding capacity of ≥ 18 grams, allowing the filter to maintain its efficiency throughout the entire service interval.
The high‑strength steel centre tube prevents media collapse under high differential pressure, ensuring that the filter maintains its structural integrity even during cold‑start conditions when oil viscosity is highest.
The zinc‑phosphate and epoxy coating system provides excellent corrosion resistance, protecting the housing from rust and pitting even in high‑humidity and chemically aggressive environments.
With proper installation and routine replacement, the 800367935 oil filter can provide reliable service for the entire lifespan of the ADT, reducing the need for premature engine overhauls.
The combination of high‑quality media, precision manufacturing, and robust construction makes this oil filter ideal for the most demanding off‑highway applications.
The 800367935 oil filter is specifically designed to fit XCMG’s full range of articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 models, as well as their respective variants and engine configurations.
Its thread size, gasket design, and overall dimensions are identical to the original factory‑fitted component, ensuring a direct, drop‑in replacement without the need for adapters or modifications.
The filter is compatible with XCMG’s standard engine oil specifications and lubrication systems, simplifying inventory management and reducing the risk of incorrect filter selection for fleet operators.
Whether used in standard ADT applications or in severe‑duty mining operations, the 800367935 oil filter provides consistent filtration performance across all engine types, backed by XCMG’s engineering expertise.
For operators with mixed fleets, this oil filter offers the assurance of OEM quality and fitment, reducing the risk of mismatched components and engine lubrication issues.
Always verify the specific engine model and oil filter application for your ADT to ensure the correct filter selection.
The 800367935 oil filter is designed for quick and simple installation using standard hand tools, minimising downtime and labour costs during routine oil and filter changes.
Before installation, clean the filter mounting surface on the engine block to remove any old gasket material, dirt, or debris that could compromise the seal.
Apply a thin film of clean engine oil to the new filter’s rubber gasket to ensure a proper seal and prevent the gasket from sticking or tearing during installation.
Screw the new filter onto the mounting stud by hand until the gasket contacts the sealing surface, then tighten an additional ¾ to 1 full turn (or to the manufacturer’s specified torque, typically 20‑25 Nm) using a filter wrench.
After installation, start the engine and check for any oil leaks around the filter seal, and verify that the oil pressure warning light extinguishes within a few seconds.
Always replace the oil filter at the recommended service interval (typically 500 hours for standard duty or 250 hours for severe duty) and whenever the engine oil is changed.
Investing in the genuine 800367935 oil filter delivers significant long‑term savings by preventing engine wear, reducing oil consumption, and avoiding costly engine overhauls that can result from inadequate filtration.
A single engine failure due to oil‑borne contamination can cost over $15,000 in parts, labour, and lost production — a risk that is virtually eliminated with OEM‑quality oil filtration.
Over a typical 15,000‑hour service life, an ADT’s engine oil can be contaminated with millions of particles. The 800367935 oil filter’s high efficiency and dirt‑holding capacity ensure consistent oil cleanliness throughout.
By maintaining oil cleanliness, the filter also reduces wear on engine components, extending oil change intervals (where permitted) and lowering overall lubrication costs.
Field data from large‑scale mining operations shows that using genuine XCMG oil filters reduces engine‑related downtime by up to 35%.
The filter’s robust construction and corrosion‑resistant housing ensure it remains serviceable even after years of exposure to harsh conditions, eliminating the need for premature replacement.
XCMG is committed to sustainable manufacturing practices, and the 800367935 oil filter reflects this through its use of recyclable materials and energy‑efficient production processes.
The filter’s high efficiency and long service life reduce the frequency of filter changes, minimising waste generation and the environmental impact associated with used filter disposal.
By preventing engine wear and oil degradation, the filter also helps reduce oil consumption and the release of combustion by‑products, supporting environmental stewardship and regulatory compliance.
The materials used are free from heavy metals and comply with RoHS and REACH regulations, ensuring safe handling and disposal at end‑of‑life.
Choosing genuine XCMG filtration components supports responsible equipment management while delivering superior operational reliability and performance.
The filter’s robust, simple design allows for easy inspection and replacement, minimising resource consumption and waste generation.
The 800367935 oil filter is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, and Australia, ensuring rapid availability to support your maintenance schedules and minimise downtime.
Each filter is individually packaged in protective anti‑corrosion bags and bulk‑packed in cartons to prevent damage and contamination during transit and warehousing.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping options to optimise procurement costs and simplify inventory management.
Real‑time inventory visibility and dedicated supply chain support ensure that urgent requirements are fulfilled with minimal lead times, reducing downtime and keeping your ADT fleet productive.
The robust packaging protects the oil filter from corrosion and physical damage during storage, preserving its condition until installation.
With XCMG’s global aftermarket network, you can rely on consistent product quality and availability to keep your fleet running smoothly.
Every 800367935 oil filter is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability from raw media to finished product.
Incoming filter media is tested for basis weight, thickness, air permeability, and burst strength to ensure it meets the required specifications.
During production, critical dimensions such as media pleat count, end‑cap bond integrity, and bypass valve calibration are continuously monitored using automated inspection systems, and a 100% functional test is performed on every finished filter.
After assembly, each filter undergoes a leak test and burst pressure test to verify its structural integrity and sealing performance.
Sample units from each production batch are subjected to multi‑pass filtration efficiency testing, dirt‑holding capacity testing, and temperature cycling to validate long‑term durability and performance.
Only filters that pass all quality checks are released, ensuring that you receive a reliable, high‑performance engine protection component.
Aftermarket oil filters often use inferior media, substandard sealing materials, or imprecise bypass valve calibration that lead to premature engine wear, oil leakage, and costly engine damage.
The genuine 800367935 is engineered to XCMG’s exacting standards, ensuring correct fit, reliable filtration efficiency, and long‑lasting engine protection.
Its superior media quality and precision manufacturing deliver consistent performance, reducing the risk of costly breakdowns and unplanned downtime.
Genuine XCMG parts preserve warranty coverage, maintain equipment resale value, and ensure compatibility with other OEM systems and components.
Backed by XCMG’s global quality standards and technical support, you can trust the performance and reliability of this oil filter.
Choose genuine XCMG for uncompromising engine protection in the toughest operating conditions.
The XCMG 800367935 Oil Filter is an essential engine protection component for any articulated dump truck, ensuring reliable oil cleanliness, superior wear protection, and long service life.
Its precision‑engineered design, high‑efficiency media, and robust construction deliver consistent filtration performance, enabling safe and productive operation in the harshest environments.
By safeguarding engine oil quality, this oil filter reduces downtime, lowers maintenance costs, and extends machine service life.
Always source genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance.
Choose the 800367935 oil filter for dependable engine protection and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment filtration components that deliver real value.
OEM 800367935 – XCMG Oil Filter – the definitive engine lubrication filtration component for your ADT’s diesel powerplant. Engineered for durability, designed for simplicity, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
