Bracket
Кронштейн
Soporte
The 332109549 Bracket is a precision‑fabricated mounting support engineered to provide secure attachment points for hydraulic lines, electrical wiring, sensors, and control modules on XCMG articulated dump trucks. As a non‑engine auxiliary component, this bracket ensures that critical systems remain properly positioned and protected from vibration, impact, and environmental stress, contributing to the overall reliability and longevity of the vehicle. Manufactured from high‑strength carbon steel with a corrosion‑resistant zinc‑nickel plating and a durable black powder‑coat finish, the 332109549 bracket delivers exceptional rigidity, fatigue resistance, and long‑term durability, making it an indispensable element for maintaining system integrity in demanding mining, quarrying, and heavy construction operations.
The 332109549 Bracket is a precision‑fabricated structural mount engineered to provide secure attachment points for hydraulic lines, electrical wiring, sensors, and control modules on XCMG articulated dump trucks.
As a non‑engine auxiliary component, this bracket ensures that critical systems remain properly positioned and protected from vibration, impact, and environmental stress, contributing to the overall reliability and longevity of the vehicle.
In heavy‑duty mining and construction equipment, loose or inadequately supported hoses and cables can chafe, fatigue, or become disconnected, leading to fluid leaks, electrical shorts, or system malfunctions.
The 332109549 bracket is designed to provide a stable, rigid platform that holds these components securely in place, maintaining clearance from moving parts and heat sources.
Manufactured from high‑strength carbon steel with a corrosion‑resistant zinc‑nickel plating and a durable black powder‑coat finish, this bracket delivers exceptional rigidity, fatigue resistance, and long‑term durability.
This component is a direct OEM replacement, restoring original mounting integrity after damage or wear, ensuring that all auxiliary systems remain correctly aligned and secured.
The 332109549 Bracket is essential for maintaining the orderly routing of hydraulic hoses, fuel lines, and electrical cables.
Properly secured lines are less likely to be pinched, abraded, or snagged by chassis movement, which is a common cause of premature failure in heavy equipment.
By holding components at the correct distance from each other and from the vehicle structure, the bracket prevents contact that could lead to wear or short circuits.
The bracket’s design also facilitates easier maintenance, as it allows technicians to access fasteners and connectors without having to wrestle with disorganised bundles of tubing and wiring.
This organised approach reduces the time required for servicing and minimises the risk of accidental damage during repairs.
The 332109549 Bracket features a carefully optimised L‑shaped geometry that provides excellent support while maintaining a compact footprint.
The bracket is laser‑cut from high‑strength steel plate and then formed using CNC press‑brake technology to achieve precise bend angles and consistent part geometry.
Reinforcement ribs are integrated into the design at critical stress points, increasing the bracket’s torsional stiffness and resistance to bending under load.
Four mounting holes are provided with slotted profiles, allowing for fine adjustment of the bracket’s position during installation to compensate for manufacturing tolerances or chassis variations.
Additional small‑diameter holes or cut‑outs are incorporated for cable ties or clamp attachments, simplifying the task of securing multiple lines to the bracket.
The bracket’s edges are fully deburred and radiused to prevent chafing of hoses and wires, and to protect service personnel from sharp edges during maintenance.
All fasteners and mounting points are designed to be accessible with standard tools, making installation and removal straightforward and efficient.
The 332109549 Bracket is manufactured using robotic welding techniques that ensure consistent, high‑quality joints and superior structural integrity.
All welded connections are performed in a controlled environment with precise heat input and shielding gas flow, resulting in strong, pore‑free welds.
Each weld is visually inspected and subjected to random non‑destructive testing (NDT) to verify there are no cracks or inclusions that could compromise the bracket’s strength.
After welding, the entire assembly is stress‑relieved to eliminate residual stresses that could cause distortion or fatigue cracking over time.
A final dimensional inspection is performed using a coordinate measuring machine (CMM) to confirm that all hole positions, angles, and overall dimensions meet the strict OEM tolerances.
This attention to detail ensures that every bracket is identical and interchangeable, simplifying inventory management and guaranteeing a perfect fit on the vehicle.
The 332109549 Bracket is fabricated from high‑strength Q355D carbon steel (equivalent to S355J2), a material that offers an excellent balance of strength, toughness, and weldability.
Q355D has a minimum yield strength of 355 MPa, providing the structural integrity required to support heavy components and withstand the dynamic loads encountered during vehicle operation.
The material’s low carbon equivalent ensures good formability and weldability, making it ideal for the laser‑cutting and forming processes used in the bracket’s manufacture.
To protect against the severe corrosive conditions encountered in mining and coastal environments, the bracket is finished with a dual‑layer coating system.
The base layer is a zinc‑nickel electroplating that provides sacrificial cathodic protection and offers over 500 hours of salt spray resistance (ASTM B117), significantly outperforming standard zinc plating.
The top coat is a black powder coating that is baked on to form a tough, abrasion‑resistant finish. This coating provides excellent resistance to stone chipping, UV degradation, and chemical exposure.
The combination of these coatings ensures that the bracket retains its protective properties and appearance even after years of service, reducing the need for frequent replacements.
The 332109549 Bracket plays a vital role in preventing damage to hydraulic and electrical systems caused by uncontrolled movement.
Loose hoses can whip against chassis components, causing abrasion and eventual rupture, which can lead to sudden loss of hydraulic pressure and safety hazards.
Similarly, unsecured cables can chafe through their insulation, causing short circuits that may disable critical systems or even start a fire.
The 332109549 bracket prevents these issues by providing a reliable, stable mounting point that holds lines securely in place, protecting them from movement and contact with abrasive surfaces.
Regular inspection of brackets is recommended during routine maintenance to check for signs of loosening, corrosion, or damage. Any worn or damaged brackets should be replaced promptly.
Using a genuine XCMG 332109549 bracket ensures that the component meets the original design specifications, providing the intended level of support and protection.
The 332109549 Bracket is specifically designed for use in XCMG articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 series models.
These vehicles are deployed in a wide range of demanding applications, including open‑pit mining, quarrying, heavy construction, water conservancy, harbour operations, and large‑scale earthmoving projects.
The bracket is commonly used to support hydraulic lines, brake tubes, fuel lines, electrical harnesses, and sensor assemblies in the engine bay, cab, and chassis areas.
Beyond articulated dump trucks, this bracket can also be used in other XCMG equipment that employs similar mounting requirements, such as wheel loaders, crawler dozers, excavators, and motor graders.
The bracket’s standard mounting hole pattern and adjustability make it a versatile replacement part for a wide range of heavy machinery, providing flexibility for maintenance and repair operations.
When replacing a worn or damaged bracket, using the genuine 332109549 part ensures correct fitment, material strength, and coating quality, safeguarding the lines it secures.
It is always recommended to inspect the hoses or cables for any signs of wear or damage when installing a new bracket, and to replace them if necessary.
Installing the 332109549 Bracket is a straightforward process that can be completed with basic hand tools, minimizing downtime and installation effort.
Before installation, position the bracket against the mounting surface on the chassis, aligning the four slotted holes with the corresponding threaded holes or studs.
Adjust the bracket to the desired position, taking into account the routing of hoses and cables, and ensuring that there is sufficient clearance from moving parts and heat sources.
Insert the M12 bolts and hand‑tighten them to secure the bracket loosely. Then, using a torque wrench, tighten the bolts to the recommended torque of 70–90 N·m, following a diagonal pattern to ensure even clamping pressure.
Once the bracket is securely attached, route the hoses, cables, or tubes through the designated clamping areas, using cushion clamps or cable ties as needed. Avoid sharp bends or kinks.
During routine maintenance, inspect the bracket for signs of corrosion, deformation, or loosening of fasteners. Re‑tighten bolts to the recommended torque as needed.
If any damage or significant wear is detected, replace the bracket immediately. Keeping a spare 332109549 bracket on hand can help minimize downtime during unexpected repairs.
The 332109549 Bracket is manufactured in ISO 9001 and ISO 14001 certified facilities, adhering to the highest quality and environmental management standards.
The raw material, Q355D steel, is sourced from approved mills and undergoes rigorous incoming inspection, including chemical analysis, tensile testing, and impact testing.
The laser‑cutting process is precisely controlled, with regular tooling maintenance and dimensional checks to ensure consistent part geometry and hole positioning.
The zinc‑nickel plating and powder coating processes are carefully monitored, with coating thickness and adhesion verified using non‑destructive testing methods.
Each bracket is 100% inspected for visual defects, dimensional accuracy, flatness, and coating integrity. A sample from each production batch is subjected to salt spray testing and load‑deflection testing.
These rigorous quality assurance measures guarantee that every 332109549 bracket delivers the reliability, strength, and durability expected from a genuine XCMG component.
Using genuine XCMG 332109549 brackets guarantees proper fit, optimal component protection, and compatibility with the vehicle’s mounting systems.
The 332109549 Bracket is an essential component for maintaining the organisation, protection, and reliability of hydraulic and electrical systems on XCMG articulated dump trucks.
As a non‑engine structural support, this bracket provides a sturdy, adjustable mounting platform that keeps hoses, cables, and sensors securely in place, preventing chafing, fatigue, and disconnection.
Its high‑strength steel construction, advanced corrosion‑resistant coating, and precision engineering ensure exceptional durability and long‑term performance in the most demanding mining, quarrying, and construction environments.
With its precise OEM fitment and uncompromising quality, this bracket offers outstanding value and peace of mind for fleet operators, maintenance professionals, and equipment owners alike.
Choosing the genuine XCMG 332109549 bracket protects your hydraulic and electrical systems from damage, reduces maintenance costs, and ensures that your articulated dump truck remains productive, reliable, and safe.
Always source genuine XCMG parts from authorised distributors to guarantee authenticity, compliance with OEM specifications, and long‑term performance.
Whether for planned maintenance or emergency repairs, the 332109549 bracket is the trusted choice of professionals who demand the highest standards of quality and reliability in their heavy equipment.
