The genuine XCMG 273100560 Nameplate is an OEM‑manufactured identification plate designed for motor grader frames, cab interiors, and component housings. This 273100560 nameplate provides permanent, legible display of the machine serial number, model designation, manufacturing date, and critical operating parameters. Engraved or embossed on corrosion‑resistant aluminum, the XCMG 273100560 nameplate meets international equipment identification standards and ensures full traceability for service, warranty, and safety compliance.
The 273100560 nameplate is installed on all XCMG GR series motor graders, including GR135, GR165, GR180, GR215, GR260, GR300, and GR350 models. It is typically riveted to the front frame rail, the cab door jamb, or the engine side panel. A damaged, faded, or missing nameplate can lead to confusion during parts ordering, improper service procedures, and regulatory inspection failures.
Replacing a worn or illegible nameplate with genuine XCMG 273100560 restores clear machine identification, supports accurate maintenance records, and assists in theft recovery. This small but essential component is critical for any professional fleet operation.
| Parameter | Specification |
|---|---|
| OEM Number | 273100560 |
| Brand | XCMG (Genuine Original Equipment) |
| Product Type | Nameplate / Identification Plate / Serial Number Plate |
| Material | Anodized aluminum (2.0 mm thickness) or stainless steel (1.5 mm) |
| Dimensions (Width x Height) | 120 mm × 80 mm ±0.5 mm |
| Marking Method | Laser etching (permanent) or chemical etching |
| Information Displayed | Machine serial number, model, year of manufacture, gross weight, engine power, XCMG logo |
| Mounting Holes | 4 holes, Ø4.2 mm (countersunk for rivets) |
| Hole Spacing (Center to Center) | 100 mm × 60 mm |
| Corrosion Resistance | Salt spray tested 480 hours (ASTM B117) – no blistering or fading |
| Temperature Range | -40°C to +120°C continuous exposure |
| Legibility Life | ≥ 10 years (outdoor, UV‑resistant coating) |
| Font & Character Height | Arial bold, main text 5 mm, serial number 4 mm |
| Attachment Hardware | 4 aluminum blind rivets (included) |
| Compliance | ISO 9001, ISO 14000, CE machinery directive (2006/42/EC) |
| Compatible Models | XCMG GR135, GR165, GR180, GR215, GR260, GR300, GR350 motor graders |
| Superseded Part Numbers | 273100499, 273100522, 273100588 |
The XCMG 273100560 nameplate is the legally required identification for each motor grader. It ties the machine to its factory records, emissions certification, and safety compliance data.
Without a clear nameplate, dealers cannot verify warranty eligibility, parts suppliers cannot confirm correct components, and inspectors may reject the machine for site entry or road use.
The nameplate also deters theft – a removed or altered plate raises red flags during resale or border crossings. Replacing a damaged plate with genuine 273100560 keeps your grader legally compliant and fully traceable.
Each 273100560 nameplate begins with a high‑purity aluminum sheet that is anodized to create a hard, corrosion‑resistant surface. The anodized layer also provides excellent adhesion for the UV‑stable black ink.
Laser etching burns the characters into the anodized layer, producing marks that cannot be removed by solvents or abrasion. For stainless steel versions, chemical etching creates a permanent, readable plaque.
XCMG tests each batch for salt spray resistance (480 hours) and UV fade resistance (1000 hours QUV). The rivet holes are precisely punched to prevent cracking during installation.
To replace a damaged nameplate, first clean the mounting area on the frame or cab panel. Remove old rivets by drilling their heads with a 4 mm bit. Do not enlarge the existing holes.
Position the new 273100560 nameplate and secure it using the supplied aluminum blind rivets. Use a hand riveter to pull each rivet until the mandrel snaps. Ensure the plate is flush and cannot rotate.
After installation, record the new plate’s details in your equipment log. Never paint over the nameplate – this can make it unreadable and may violate local regulations.
Faded or missing serial number digits, holes worn through from vibration, corrosion making text illegible, and physical damage from rock impacts or pressure washing.
Also replace if the plate has been painted over or if rivets are loose, causing the plate to rattle. A clean, legible nameplate is required for annual safety inspections in many territories.
Inspect the nameplate during every wash or monthly walk‑around. Check for legibility, secure attachment, and any attempts at alteration (scratches or grinding on the serial number).
If you notice fading, clean the plate gently with mild soap and water – never solvents or abrasives. If the text is still unreadable, replace immediately with genuine 273100560.
Keep a digital photo of the nameplate in your maintenance records. When selling or exporting the grader, the original or replacement nameplate must match the frame‑stamped VIN. Using genuine XCMG plates avoids legal complications.
Every genuine XCMG 273100560 nameplate is backed by a 12‑month warranty. Regional stock in Houston, Rotterdam, Dubai, and Shanghai ensures rapid delivery worldwide.
Standard air freight: 3‑7 business days. Emergency express (24‑48 hours) available. Bulk orders (10+ plates) qualify for volume discounts and sea freight.
Aftermarket nameplates often use cheap adhesive labels or thin plastic that fades within months. Genuine XCMG 273100560 uses anodized aluminum and laser etching for a service life matching the machine. Protect your grader’s identity and compliance – order genuine today.
Keep a spare 273100560 nameplate in your parts room. A lost or destroyed plate can delay customs clearance or site access. Replacing it is a five‑minute job that protects your investment and ensures smooth operations.
Upgrade to genuine XCMG – permanent markings, OEM hole pattern, and full compliance with ISO and CE standards. Order the 273100560 Nameplate now and maintain proper identification for your motor grader throughout its service life.
