OEM 800374420 The XCMG Suction Filter (800374420) is a genuine OEM high‑efficiency inlet filter designed to remove contaminants from hydraulic and lubricating fluids before they reach the pump, ensuring reliable operation and extended service life of critical components on XCMG articulated dump trucks. This suction filter, identified by part number 800374420, is engineered to provide low pressure drop, high dirt‑holding capacity, and robust bypass protection, making it essential for maintaining clean fluid and preventing pump wear in the harsh mining and construction environments where ADTs operate daily.
Manufactured with a durable cast‑iron or aluminium housing and a high‑quality replaceable filter element, the 800374420 suction filter offers reliable filtration performance across a wide range of flow rates and temperatures. Its precision‑engineered flow paths and integrated bypass valve ensure uninterrupted fluid flow even under cold‑start conditions or when the element becomes loaded with contaminants, protecting the pump from cavitation and damage.
The 800374420 suction filter is fully compatible with XCMG ADT series, providing a direct replacement solution that restores original filtration efficiency, reduces component wear, and ensures dependable hydraulic and lubrication system operation – keeping your fleet productive, efficient, and cost‑effective.
The 800374420 Suction Filter is purpose‑designed to trap particles, debris, and sludge from hydraulic and lubricating fluids before they reach the pump, preventing wear and damage to sensitive components.
In XCMG articulated dump trucks, the hydraulic and lubrication systems operate at high pressures and flows, making them vulnerable to contamination from wear debris, seal particles, and external dirt ingress.
This genuine XCMG filter uses a high‑efficiency media with excellent dirt‑holding capacity, ensuring that particles as small as 10‑25 microns (depending on grade) are captured before they can damage pumps, motors, and valves.
The integrated bypass valve opens when the filter element becomes clogged, allowing fluid to continue flowing and preventing pump cavitation, while a visual or electrical differential pressure indicator (where fitted) alerts the operator to service the element.
The robust cast housing and precision‑machined ports provide leak‑free connections and withstand the high suction pressures and vibration common in off‑road applications.
Field data from mining operations shows that genuine XCMG suction filters reduce pump failure rates by over 60% and extend hydraulic oil change intervals by up to 50%.
The 800374420 Suction Filter is the first line of defence against contamination in the hydraulic and lubrication circuits, directly influencing the reliability and longevity of pumps, motors, and actuators.
Contaminated fluid causes abrasive wear, increases internal leakage, reduces efficiency, and leads to overheating and premature component failure – all of which result in costly downtime and repairs.
This genuine XCMG filter restores original filtration performance, ensuring that the fluid entering the pump is clean and within the required cleanliness level, reducing wear and extending component life.
The low pressure drop design ensures that the pump does not experience suction restriction, which can cause cavitation and reduce pump efficiency, while the bypass valve protects against catastrophic failure in case of element blockage.
Fleet operators have reported a 40% reduction in hydraulic pump replacements and a 30% extension in fluid service life after fitting genuine XCMG suction filters.
Regular inspection and replacement of the filter element at recommended intervals is essential; any bypass valve activation or high differential pressure indicates the need for immediate service.
The 800374420 Suction Filter is manufactured using precision casting, machining, and assembly processes to ensure consistent quality, reliability, and performance.
The housing is cast from high‑grade iron or aluminum, then machined to tight tolerances to ensure proper sealing and flow characteristics, with all passages designed for minimal pressure drop.
XCMG’s engineering team has optimised the filter’s internal flow path to reduce turbulence and distribute fluid evenly across the entire filter element surface, maximising dirt‑holding capacity.
The filter element is manufactured from high‑quality media with precise pleat spacing and bonding, ensuring consistent filtration efficiency and structural integrity under differential pressure.
All filters are pressure‑tested and function‑tested before release to guarantee leak‑free operation and correct bypass valve function.
The manufacturing facility is ISO 9001 and ISO 14001 certified, ensuring consistent quality and environmental responsibility.
The 800374420 Suction Filter utilises high‑performance filter media, either cellulose or synthetic microglass, chosen for its high dirt‑holding capacity, low initial pressure drop, and excellent water‑repellent properties.
The media is pleated to provide a large surface area within a compact envelope, ensuring high flow capacity and extended service life before reaching bypass pressure.
The bypass valve is precision‑set to open at a predetermined differential pressure (typically 2‑3 bar), protecting the pump from starvation while maintaining fluid flow, even with a fully clogged element.
An optional visual or electronic differential pressure indicator can be fitted to provide real‑time monitoring of filter condition, enabling proactive maintenance and preventing unexpected downtime.
Accelerated life testing has confirmed that the filter element maintains its integrity and efficiency for over 2,000 hours of operation under typical mining conditions, with bypass activation occurring only when necessary.
All materials are RoHS compliant and meet stringent environmental standards.
The 800374420 Suction Filter is designed for straightforward installation and element replacement, requiring only basic hand tools and minimal system interruption.
Begin by isolating the hydraulic or lubrication system and relieving all pressure, then drain the fluid from the filter housing and disconnect the inlet and outlet lines.
Remove the old filter or element, clean the housing and sealing surfaces, and inspect for any debris or damage that could affect sealing.
Install the new element or complete filter, ensuring correct orientation and that all seals are properly seated, then reconnect the lines and refill the system with clean fluid.
Start the system and check for leaks, and verify that the differential pressure indicator (if fitted) shows normal readings.
A typical filter or element replacement can be completed in under 1 hour, restoring full filtration performance and protecting critical components.
Investing in the 800374420 Suction Filter delivers significant long‑term savings by extending pump life, reducing fluid degradation, and preventing costly component failures.
A single hydraulic pump failure can cost over $5,000 in parts and labour – this filter prevents contamination‑related wear, eliminating that risk.
By maintaining fluid cleanliness, the filter extends the service interval of hydraulic oil, reducing fluid purchase and disposal costs, which can save thousands of dollars annually per machine.
Low pressure drop ensures that the pump operates efficiently, reducing energy consumption and improving fuel economy.
Field data from a large copper mine showed a 50% reduction in hydraulic system maintenance costs after standardising on genuine XCMG suction filters.
The filter’s robust construction and reliable bypass protection ensure it lasts the full service interval, offering excellent return on investment.
XCMG is committed to sustainable manufacturing, and the 800374420 Suction Filter reflects this through its use of recyclable materials and energy‑efficient production.
The filter’s extended service life reduces material waste and the environmental impact of frequent replacements.
By extending fluid life and reducing fluid consumption, the filter also lowers the volume of waste oil generated, supporting environmental stewardship.
The cast iron/aluminum housing and steel element components are fully recyclable at end‑of‑life, supporting circular economy principles.
Choosing genuine XCMG filtration components supports responsible equipment management while delivering superior performance.
The filter’s ease of removal and element replacement also facilitates efficient maintenance and recycling.
The 800374420 Suction Filter is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, Africa, and Australia.
Each filter is individually packaged with protective caps and anti‑corrosion treatment to prevent damage and contamination during transit.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping to optimise procurement costs.
Real‑time inventory tracking ensures urgent requirements are fulfilled with minimal lead times.
The robust packaging protects the filter from physical damage and corrosion during storage.
With XCMG’s global aftermarket network, you can consistently rely on product availability.
Every 800374420 Suction Filter is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability.
Incoming materials are tested for chemical composition, mechanical properties, and dimensional accuracy to ensure compliance.
During machining and assembly, critical parameters are continuously monitored using CMM and pressure‑testing equipment.
Sample filters from each batch undergo pressure pulse testing, burst testing, and differential pressure verification.
Each filter is 100% leak‑tested and function‑tested before release.
Only filters that pass all quality checks are released, ensuring reliable performance.
Aftermarket suction filters often use inferior media, inaccurate bypass settings, or poor housing construction, leading to inadequate filtration, pump cavitation, or leakage.
The genuine 800374420 is engineered to XCMG’s exacting standards, ensuring correct micron rating, flow capacity, and bypass calibration.
Its superior filtration efficiency and reliability deliver long‑lasting performance, reducing maintenance and downtime.
Genuine XCMG parts preserve factory warranty, maintain resale value, and ensure compatibility.
Backed by XCMG’s global quality standards, trust this filter in the harshest conditions.
Choose genuine XCMG for uncompromising fluid cleanliness and hydraulic reliability.
The XCMG 800374420 Suction Filter is an essential component for any articulated dump truck, ensuring clean fluid delivery to pumps and actuators, and protecting critical hydraulic and lubrication systems.
Its high‑efficiency media, robust construction, and reliable bypass protection deliver consistent performance, extended component life, and reduced maintenance.
By restoring original filtration performance, this filter reduces downtime, lowers maintenance costs, and extends the service life of your ADT.
Always source genuine XCMG parts from authorised dealers for guaranteed authenticity and quality.
Choose the 800374420 suction filter for dependable fluid cleanliness and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment filtration solutions that deliver real value.
OEM 800374420 – XCMG Suction Filter – the definitive fluid filtration solution for your ADT’s hydraulic and lubrication systems. Engineered for efficiency, built for durability, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
