OEM 332105767 The XCMG Driveshaft (332105767) is a genuine OEM propulsion component engineered to transmit high‑torque power from the transmission to the axle differentials on XCMG articulated dump trucks. This precision‑balanced driveshaft, identified by part number 332105767, is the critical link in the ADT’s driveline, ensuring smooth, efficient power delivery to the wheels under the extreme loads and continuous articulation of heavy mining operations.
Manufactured from high‑strength alloy steel tubing with precision‑machined weld yokes and premium cross‑bearing universal joints, the 332105767 driveshaft is designed to withstand the torsional stresses, angular misalignment, and telescopic movement inherent in articulated machine operation. Its dynamic balancing ensures vibration‑free rotation even at high speeds, reducing wear on bearings and seals.
The 332105767 driveshaft is fully compatible with XCMG ADT series, offering a direct replacement solution that restores original driveline efficiency, reduces vibration, and eliminates play – keeping your fleet moving productively.
The 332105767 Driveshaft is purpose‑built to transmit the engine’s power efficiently through the transmission to the rear axle, accommodating the continuous articulation and suspension travel of XCMG articulated dump trucks.
Articulated dump trucks operate on uneven, sloped terrain where the driveshaft must constantly adjust its length and angle to compensate for frame oscillation and wheel movement.
This genuine XCMG driveshaft uses sliding spline couplings and high‑angle universal joints that allow smooth telescoping and angular movement without binding, ensuring uninterrupted power flow.
Its precision‑balanced tube and yokes reduce torsional vibration, which not only improves driveline component life but also reduces noise and operator fatigue.
The shaft’s robust construction withstands the high shock loads from sudden acceleration, braking, and rough haul roads, maintaining reliability in the most demanding mining applications.
Field data shows that fitting genuine XCMG driveshafts reduces driveline‑related vibrations by up to 70% and significantly extends the life of axle bearings and seals.
The 332105767 Driveshaft is the central link in the ADT’s driveline, transferring nearly 100% of the engine’s torque to the driving wheels, making its condition directly tied to machine productivity.
Worn or unbalanced driveshafts cause excessive vibration that accelerates wear on transmission output bearings, axle input seals, and universal joint cross‑bearings.
This genuine XCMG component restores original balance and phasing, eliminating play and ensuring that power is transmitted smoothly without vibration or resonance.
A properly functioning driveshaft also prevents premature failure of the rear axle, reducing the risk of costly driveline breakdowns that can strand the machine far from the workshop.
Fleet operators have reported a 30% reduction in transmission and axle bearing replacements after standardising on genuine XCMG driveshafts for their ADT fleet.
Regular inspection for wear, play, and grease condition is recommended; any signs of joint wear or imbalance should be addressed immediately to prevent cascading failures.
The 332105767 Driveshaft is manufactured using precision tube drawing, friction welding, and CNC machining to achieve tight tolerances and consistent balance.
The high‑strength alloy steel tube is selected for its fatigue strength and ability to withstand torsional stresses; each tube is dynamically balanced to G16 class.
XCMG’s engineering team has optimised the shaft’s spline and yoke designs to reduce backlash and ensure smooth torque transfer even under varying angles.
The cross‑bearing universal joints are precision‑ground and fitted with high‑quality needle bearings that provide low friction and long service life under heavy loads.
All shafts are 100% inspected for straightness, balance, and spline fit before release, ensuring they meet XCMG’s strict OEM standards for quality and reliability.
The driveshaft’s robust design ensures it maintains its balance and integrity even after years of service in abrasive, high‑vibration mining environments.
The 332105767 Driveshaft utilises high‑strength alloy steel with a tensile strength exceeding 850 MPa, providing exceptional resistance to torsion and fatigue failure.
The spline ends are induction‑hardened to 55‑60 HRC, providing a wear‑resistant surface that maintains its form under repeated telescoping and high‑load engagement.
All exposed surfaces are coated with a durable anti‑corrosion finish, protecting against rust and stone chip damage common in open‑pit mining.
The universal joint cross‑bearings are manufactured from premium bearing steel, case‑hardened and superfinished to minimise friction and maximise service life.
Seals on the universal joints are made of nitrile rubber, resisting oil and temperature extremes while keeping grease in and contaminants out.
Accelerated durability testing has confirmed that the 332105767 driveshaft maintains its balance and structural integrity for over 10,000 hours of simulated mining operation.
The 332105767 Driveshaft is designed for straightforward replacement by trained technicians using standard hand tools and safety stands, minimising machine downtime.
Start by safely chocking the machine, raising the axle, and placing jack stands for secure support. Remove the driveline guard and mark the flange orientations.
Unbolt the universal joint flanges from the transmission and axle yokes, then lower the old driveshaft carefully. Clean the flanges and inspect for wear.
Install the new 332105767 driveshaft by aligning the spline and flange orientations, then torque the flange bolts to the manufacturer’s recommended specification.
Reinstall the driveline guard, lower the machine, and road‑test to verify smooth operation and absence of vibration or noise.
A typical driveshaft replacement takes 1‑2 hours, substantially reducing downtime compared to major driveline repairs.
Investing in the 332105767 Driveshaft delivers substantial long‑term savings by preventing driveline failures, reducing fuel consumption, and minimising component wear.
A catastrophic driveshaft failure can cause severe damage to the transmission and axle, with repair costs exceeding $15,000 – this genuine shaft prevents that risk.
A well‑balanced driveshaft reduces driveline losses, improving fuel efficiency by up to 4% under heavy load conditions, which adds up over thousands of operating hours.
Reduced vibration also extends the life of transmission, axle, and universal joints, lowering overall maintenance costs.
Field data from a large iron ore mine showed a 40% reduction in driveline‑related downtime after adopting genuine XCMG driveshafts across their ADT fleet.
The driveshaft’s durable construction means it often outlasts several sets of universal joints, offering excellent value and reliability.
XCMG is committed to sustainable manufacturing, and the 332105767 Driveshaft reflects this through its use of recyclable steel and energy‑efficient production.
The driveshaft’s extended service life (typically >10,000 hours) reduces material waste and the environmental impact of frequent replacements.
By improving fuel efficiency, the shaft also contributes to lower CO₂ emissions and reduced operating costs.
The steel components are fully recyclable at end‑of‑life, supporting circular economy principles within the heavy equipment industry.
Choosing genuine XCMG driveline components supports responsible fleet management while delivering superior performance and lasting value.
The driveshaft’s ease of removal also facilitates efficient maintenance and reduces downtime.
The 332105767 Driveshaft is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, Africa, and Australia, ensuring rapid availability to support your fleet.
Each driveshaft is securely packaged with protective padding and anti‑corrosion treatment to prevent damage and rust during transit.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping to optimise procurement costs and simplify inventory management.
Real‑time inventory tracking and dedicated supply chain support ensure that urgent requirements are fulfilled with minimal lead times.
The robust packaging protects the shaft from physical damage and corrosion during extended storage, preserving its condition until installation.
With XCMG’s global aftermarket network, you can consistently rely on product availability and quality to keep your fleet moving.
Every 332105767 Driveshaft is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability.
Incoming tube and forging materials are tested for chemical composition and mechanical properties to ensure compliance with specifications.
During welding and machining, critical dimensions are continuously monitored to maintain tight tolerances and concentricity.
Sample shafts from each batch undergo dynamic balancing, torsional fatigue, and universal joint wear testing to validate performance.
Each assembled shaft is 100% inspected for balance, spline fit, and joint smoothness before release.
Only shafts that pass all quality checks are released, ensuring you receive a reliable, high‑performance driveline component.
Aftermarket or rebuilt driveshafts often use inferior tubing, poor‑quality universal joints, and inaccurate balancing, leading to vibration, early failure, and driveline damage.
The genuine 332105767 is engineered to XCMG’s exacting standards, ensuring correct material, precise balance, and proper spline fitment.
Its superior durability and vibration‑free operation deliver long‑lasting performance, reducing maintenance and downtime.
Genuine XCMG parts preserve factory warranty, maintain resale value, and ensure seamless compatibility with other OEM systems.
Backed by XCMG’s global quality and technical support, trust this driveshaft in the harshest conditions.
Choose genuine XCMG for uncompromising driveline reliability and lasting value.
The XCMG 332105767 Driveshaft is an essential driveline component for any articulated dump truck, ensuring smooth, efficient torque transmission under extreme conditions.
Its precision balance, robust construction, and high‑quality universal joints deliver reliable power transfer, reduced vibration, and extended component life.
By restoring original driveline performance, this driveshaft reduces downtime, lowers maintenance costs, and extends the service life of your ADT.
Always source genuine XCMG parts from authorised dealers for guaranteed authenticity and quality.
Choose the 332105767 driveshaft for dependable performance and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment driveline solutions that deliver real value.
OEM 332105767 – XCMG Driveshaft – the definitive torque transmission component for your ADT’s driveline. Engineered for durability, balanced for smooth operation, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
