The 803191811 Hydraulic Fitting is a genuine OEM connector manufactured by XCMG for motor graders and heavy construction equipment. This precision-engineered fitting provides leak-proof connections between hydraulic hoses, tubes, valves, and cylinders, ensuring reliable fluid power transmission throughout the machine. Constructed from high-strength carbon steel with a corrosion-resistant zinc-nickel plating, the 803191811 fitting is engineered to withstand extreme operating pressures up to 16 MPa (160 bar / 2,320 psi) in the load-sensing hydraulic systems of XCMG GR series motor graders. It directly replaces damaged, worn, or leaking fittings on XCMG GR135, GR165, GR180, GR215, GR260, GR300, and GR350 motor graders.
Each unit is precision machined to exact dimensional tolerances, with cleanly cut threads and a smooth sealing surface. The fitting plays a vital role in maintaining system integrity, preventing fluid leaks, and ensuring consistent hydraulic performance across all implement functions. Proper installation and regular inspection of the 803191811 help maximize machine uptime and reduce costly downtime.
| Parameter | Specification |
|---|---|
| OEM Number | 803191811 |
| Brand | XCMG (Genuine Original Equipment) |
| Product Type | Hydraulic Straight Fitting / Connector |
| Material | High-strength carbon steel (C45 / 1045 grade), heat treated |
| Surface Finish | Zinc-nickel plating + trivalent chromate (500h salt spray resistance) |
| Connection Type | Male thread × male thread (straight configuration) |
| Thread Standard | BSPP (G-thread) / Metric threads (varies by application) |
| Maximum Operating Pressure | 16 MPa (160 bar / 2,320 psi) — 18 MPa (180 bar / 2,610 psi) |
| Proof Pressure | 24 MPa (240 bar / 3,480 psi) |
| Burst Pressure | > 48 MPa (480 bar / 6,960 psi) |
| Operating Temperature Range | -40°C to +120°C |
| Hex Size (Wrench) | 17 mm / 19 mm (depending on thread size) |
| Sealing Method | O-ring face seal or taper thread (system-dependent) |
| Corrosion Resistance | 500+ hours salt spray (ASTM B117) without red rust |
| Compatible Models | XCMG GR135, GR165, GR180, GR215, GR260, GR300, GR350 motor graders |
| Certifications | ISO 9001:2015, ISO 14001, CE, RoHS |
The XCMG 803191811 Hydraulic Fitting is a small but critical component that ensures the integrity of the entire hydraulic circuit. It creates a sealed connection between hoses, tubes, valves, and cylinders, preventing pressurized fluid from escaping.
In the demanding environment of motor grader operation, where the working hydraulic pressure reaches 16 MPa (2,320 psi) with the ability to go up to 18 MPa (2,610 psi), even a minor leak can lead to reduced system pressure, sluggish implement response, and eventual component failure.
This fitting is typically found in the working device piping, steering hydraulic system, and front-wheel drive hydraulic system of XCMG GR series graders. It serves as a direct conduit for hydraulic oil between the pump, control valves, and actuators.
When a fitting fails or begins to seep, the resulting loss of pressure can affect blade lift, circle rotation, articulation, and auxiliary functions, compromising grading accuracy and operator safety.
The 803191811 is manufactured to XCMG’s exacting standards, ensuring a perfect match with the original equipment. Using a non‑genuine fitting can result in incorrect thread engagement, leading to cross‑threading, stripped ports, or inadequate sealing.
Replacing a damaged fitting with the genuine 803191811 restores hydraulic efficiency and eliminates the risk of sudden joint failure, ensuring your grader operates at peak performance.
Each 803191811 hydraulic fitting is produced from high‑quality carbon steel bar stock, then CNC machined to achieve precise thread dimensions and a smooth sealing surface. The threads are rolled rather than cut, which improves fatigue strength and ensures consistent engagement.
The fitting is then heat‑treated to achieve optimal hardness without becoming brittle, balancing strength and ductility for reliable performance under pressure. After machining and heat treatment, the fitting undergoes a multi‑stage surface finishing process.
It is first cleaned to remove any oils or residues, then zinc‑nickel plated to provide a base layer of corrosion protection. A trivalent chromate conversion coating is then applied, which enhances the protective properties and gives the fitting its silver‑gold appearance.
This finish provides over 500 hours of salt spray resistance per ASTM B117, ensuring the fitting remains corrosion‑free even in harsh, wet, or salt‑laden environments such as coastal road construction or winter snow removal operations.
XCMG tests every batch of fittings to 150% of rated working pressure using a hydrostatic test stand. Any fitting that shows signs of leakage or deformation is rejected.
Additionally, thread gauges are used to verify that every fitting meets the required GO/NO‑GO standards, guaranteeing trouble‑free installation. The manufacturing process also includes a de‑embrittlement step to eliminate hydrogen embrittlement.
Proper installation of the 803191811 fitting is essential for achieving a leak‑free seal. Before installation, clean the mating ports and threads of any dirt, old thread sealant, or debris. Apply a small amount of clean hydraulic oil to the threads to lubricate them during tightening.
For fittings with an O-ring face seal, ensure the O-ring is in good condition and lightly lubricated. Do not use Teflon tape on fittings with O-ring face seals, as the tape can shred and contaminate the hydraulic system.
Thread the fitting into the port by hand until it is snug. Then, using a torque wrench with the correct socket, apply the final torque. For M14 threads, typical torque values range from 35-45 Nm; for M16 threads, 45-55 Nm.
Always refer to the XCMG service manual for the exact specification for your application. Over‑tightening can damage the threads or distort the sealing surface, while under‑tightening will result in leaks.
After installation, run the hydraulic system and inspect the fitting for any signs of leakage. If a small weep is observed, tighten the fitting an additional 1/8 turn. If leakage persists, remove the fitting and inspect the threads and sealing surfaces for damage.
Replace the fitting if necessary. Never reuse a fitting that has been over‑tightened or damaged, as its structural integrity may be compromised.
Common indicators that a hydraulic fitting needs replacement include visible rust or corrosion, thread damage (galling, cross‑threading, or stripping), deformation of the hex flats, and evidence of leakage such as wetness around the joint or oil drips on the ground.
Also, if the fitting has been over‑tightened in the past, the threads may have stretched, reducing their ability to maintain proper clamp load. Preventive inspection of hydraulic fittings should be performed every 500 operating hours or during routine maintenance intervals.
Look for signs of rust, seepage, or damage. Tighten any loose fittings to the specified torque, but never exceed the torque value. If a fitting is found to be corroded or damaged, replace it immediately with a genuine 803191811 fitting.
When replacing hydraulic hoses or components, always install new fittings rather than reusing old ones. Old fittings may have damaged threads or degraded sealing surfaces that will not provide reliable service.
Keep a stock of 803191811 fittings in your parts inventory for rapid field repairs. The cost of a genuine fitting is negligible compared to the cost of a hydraulic system failure, environmental cleanup from a major leak, or the downtime caused by a loss of pressure.
The 803191811 Hydraulic Fitting is stocked in XCMG regional warehouses in North America (Houston), Europe (Rotterdam), Middle East (Dubai), and Asia (Shanghai). Standard air freight delivers within 3-7 business days worldwide. Expedited shipping (1-2 days) is available for urgent repairs.
Bulk orders (20+ fittings) receive volume discounts and can be shipped via sea freight. Each fitting is individually wrapped in anti‑corrosion paper or supplied in sealed bags. For large fleets, consignment stock programs are available to ensure immediate availability and reduced downtime.
Don’t let a leaking or corroded hydraulic fitting compromise your grader’s performance or safety. Order the genuine XCMG 803191811 Hydraulic Fitting today and restore reliable, leak‑free hydraulic connections.
The 803191811 Hydraulic Fitting is a small but vital component in your motor grader’s hydraulic system. A single leaking fitting can cause loss of pressure, reduced implement speed, and messy oil spills that harm the environment and create slip hazards.
Keep spare fittings in your service truck for every repair, and always replace with genuine XCMG parts. Upgrade your motor grader’s hydraulic reliability with the XCMG genuine fitting. Engineered for strength, precision, and corrosion resistance – order now and experience the quality that keeps your grader productive and leak‑free.
