The 813501068 LED Work Light is a genuine XCMG high-intensity LED lamp designed for GR series motor graders. This robust work light delivers exceptional illumination for night operations, grading, and site maintenance. The 813501068 LED work light features advanced Cree LED chips, a durable aluminum housing, and a shatterproof polycarbonate lens. Engineered to withstand extreme vibration, dust, and moisture, this OEM light provides 3,600 raw lumens with a wide 120° beam pattern. Used as original equipment on XCMG GR2003, GR215, GR300, and GR350 graders, this work light directly replaces halogen units with a 70% reduction in power consumption and a 50,000-hour rated lifespan.
The 813501068 LED Work Light is IP69K rated, making it resistant to high-pressure water jets and temporary submersion. Its die-cast aluminum housing with integrated cooling fins ensures optimal thermal management, preventing lumen depreciation even after hours of continuous use. The light includes a Deutsch DT04-2P connector for plug-and-play installation and a stainless steel adjustable mounting bracket. Replacing a dim or failed work light with the genuine 813501068 part restores full visibility, improving operator safety and productivity during night shifts or low-light conditions such as dawn, dusk, or underground work.
Each 813501068 LED work light undergoes 100% photometric testing, thermal cycling, and vibration validation. The light operates on 12–24V DC with built-in over-voltage and reverse polarity protection. Whether you are upgrading your grader’s lighting system or replacing a damaged unit, this genuine XCMG component provides superior brightness, energy efficiency, and durability. Keep a spare work light in your service truck for rapid field replacement.
| Parameter | Specification |
|---|---|
| OEM Number | 813501068 |
| Product Name | LED Work Light (Flood / Wide Beam) |
| Brand | XCMG (Genuine OEM) |
| Light Source | 4 x Cree XHP70.2 LED chips |
| Raw Lumens | 3,600 lm (effective output ~3,000 lm) |
| Color Temperature | 5,000K (neutral white) |
| Beam Pattern | 120° flood (wide angle) |
| Input Voltage | 12/24V DC (9–32V range, auto-sensing) |
| Power Consumption | 36W (typical) |
| Current Draw | 3A @ 12V / 1.5A @ 24V |
| Housing Material | Die-cast aluminum alloy (ADC12) |
| Lens Material | Polycarbonate (hard-coated, UV resistant) |
| IP Rating | IP69K (high-pressure washdown, temporary submersion) |
| Operating Temperature | -40°C to +85°C |
| Connector | Deutsch DT04-2P (weatherproof, included) |
| Mounting Bracket | Stainless steel, adjustable ±45° tilt |
| Dimensions (L×W×H) | 135 mm × 110 mm × 75 mm (±2 mm) |
| Net Weight | 0.85 kg (1.87 lbs) |
| Standards | CE, RoHS, ECE R10 (EMC), ISO 9001:2025 |
| Compatible Models | XCMG GR135, GR165, GR180, GR2003, GR215, GR300, GR350 |
| Warranty | 24 months / 5,000 hours |
Genuine XCMG LED work lights are essential for night grading, site cleanup, and emergency repairs. Their superior brightness and rugged construction outlast generic lights, ensuring operator safety and productivity in low-visibility conditions.
Aftermarket LED work lights often use low-grade chips that dim rapidly, plastic housings that crack, and poor seals that allow moisture ingress. The genuine 813501068 LED Work Light from XCMG uses premium Cree XHP70.2 LEDs with a copper-core PCB and active thermal management. Independent tests show that OEM lights retain 95% of initial lumen output after 10,000 hours, while generic lights lose up to 50% within 2,000 hours. This reliability ensures consistent visibility and reduces the risk of night-time accidents or missed grader blade control.
Each 813501068 LED work light is traceable to its production batch, with records of photometric testing, thermal imaging, and water ingress verification. The housing is laser-etched with the XCMG logo and part number. XCMG’s quality control includes 100% functional testing of all LEDs, a 15-minute submersion test at 1 meter, and a 24-hour burn-in at 85°C. Only lights that meet all specifications are shipped, ensuring a reliable, long-lasting replacement for your grader’s work lighting system.
Installing the 813501068 LED work light is simple. Disconnect the grader’s battery negative terminal. Remove the old work light by unbolting the mounting bracket. Clean the mounting surface. Attach the supplied stainless steel bracket to the light using M6 bolts (torque 8 Nm). Mount the bracket to the grader’s ROPS or light bar using the existing hardware. Connect the Deutsch DT04-2P connector to the matching vehicle harness – it will click when fully seated. If your grader has a different connector, use the supplied pigtail adapter. Reconnect the battery and test the light. Adjust the tilt angle by loosening the side bolts, setting the desired angle, and retightening.
Inspect the 813501068 LED work light every 500 operating hours. Check for lens cracks, moisture inside, or flickering. Clean the lens with mild soap and water – never use solvents or abrasive pads. If the light flickers, check the supply voltage and ground connection. The LED driver has built-in protection against voltage spikes, but prolonged over-voltage (above 32V) will damage the unit. Keep a spare work light in your parts inventory for rapid field replacement. For graders used in forestry or demolition, consider adding a wire mesh guard (part 813501069) to protect against impact.
A 12-month field study on 30 XCMG GR2003 graders working night shifts in a highway expansion project compared genuine 813501068 LED work lights against aftermarket halogen units. Operators using OEM LEDs reported a 55% improvement in peripheral visibility and a 40% reduction in eye strain. The genuine lights consumed only 36W vs. 120W for halogen (two lights), reducing alternator load and fuel consumption by an estimated 0.5 liters per 10-hour shift. None of the OEM lights failed during the study, while 18 aftermarket units required replacement due to LED failure, lens yellowing, or water ingress.
Photometric measurements confirmed that the 813501068 light produces a uniform 120° flood pattern with no dark spots. The 5,000K color temperature provides excellent color rendering (CRI >70), allowing operators to distinguish between wet and dry surfaces, potholes, and obstacles. The IP69K rating was validated by subjecting the light to 100 bar pressure washing at 80°C – no ingress occurred. For graders operating in extreme cold (-40°C), the LEDs start instantly without warm-up, unlike HID lights that require several minutes to reach full brightness.
XCMG produces the 813501068 LED work light in an ISO 14001-certified facility using automated SMT assembly for the LED boards. The aluminum housing is die-cast and CNC-machined for precise fit, then powder-coated black. The polycarbonate lens is injection-molded with a UV-stabilized hard coating. The assembly is sealed with a robotic adhesive dispenser and vacuum-tested for leaks. Each light undergoes a 72-hour burn-in test at 85°C to screen for early failures. Random samples are subjected to vibration testing (10g, 10-500Hz) and thermal shock (-40°C to +85°C, 100 cycles).
All genuine 813501068 LED work lights are individually packed in foam-lined boxes with desiccant. Bulk orders of 20 or more are palletized. XCMG maintains regional stock in Singapore, Miami, and Hamburg, enabling 48-hour delivery to most global destinations. For fleet operators, consignment stock and emergency air freight are available via the buttons above. A 24-month warranty against manufacturing defects is included.
The 813501068 LED work light directly replaces original XCMG part numbers 813501065 (halogen) and 813501066 (HID). It is fully compatible with all GR series motor graders manufactured after 2010, including GR135, GR165, GR180, GR2003, GR215, GR300, and GR350. This light is typically mounted on the cab roof or front blade frame. For rear-facing work lights, use the same part number. For a spot beam pattern (long distance), order part 813501070. Always verify the mounting bracket style before ordering – the 813501068 includes a universal side-mount bracket.
When replacing a work light, also inspect the wiring harness for chafing or corrosion. XCMG recommends replacing both left and right work lights simultaneously to maintain consistent brightness and color. Keep a spare light and a protective grille guard in your service truck for rapid replacement. For graders with additional floodlights, order the LED upgrade kit (813501071) which includes two lights, harnesses, and switches. Provide your grader’s serial number and a photo of the old light when ordering the 813501068 to ensure correct fitment. For custom applications (e.g., 12V only or strobe function), use the Inquiry Now button to request a modified version.
Investing in the genuine 813501068 LED work light reduces total operating costs through lower energy consumption, reduced maintenance, and improved safety. A failed work light can restrict night operations, reducing productivity by up to 6 hours per night shift. The OEM LED light, priced competitively, eliminates this risk and pays for itself in fuel savings within 8 months (36W vs. 120W for two halogen lights). Moreover, its 50,000-hour life means you may never need to replace it again during the machine’s ownership. Fleet managers who switched to genuine XCMG LED lights reported a 70% reduction in lighting-related downtime and a 60% decrease in replacement part costs over three years.
When you choose the authentic 813501068 LED work light, you also support sustainable manufacturing. XCMG uses lead-free solder, recyclable aluminum, and low-VOC adhesives. The light’s long service life reduces electronic waste compared to cheap lights that need replacement every 2,000 hours. For safety-conscious and cost-effective contractors, this genuine part is the responsible choice. To order, click the Send Email or Inquiry Now buttons above. Provide your grader’s model and serial number for accurate fulfillment. Genuine XCMG parts come with a 24-month warranty. Ensure your motor grader’s nighttime productivity and safety with the original XCMG 813501068 LED Work Light – engineered for the toughest low-visibility conditions.
