The 380501510 Instrument Panel Assembly is a genuine XCMG complete dashboard unit designed for GR series motor graders. This assembly houses all critical gauges, warning lights, switches, and the CAN bus display, providing the operator with real-time machine data and control. The 380501510 instrument panel features a rugged, UV-stabilized ABS housing, sealed electrical connectors, and a shatter-resistant acrylic lens. It includes the speedometer, tachometer, fuel gauge, coolant temperature gauge, hydraulic oil temperature gauge, and a multifunction LCD display for diagnostics and alerts. Used as original equipment on XCMG GR2003, GR215, GR300, and GR350 graders, this panel directly replaces cracked, faded, or non-functional units, restoring full operator interface and machine monitoring capabilities.
The 380501510 Instrument Panel Assembly is pre-wired with a sealed 48-pin Deutsch connector, making installation plug-and-play. The gauges are backlit with white LEDs for excellent night visibility, and the LCD display shows engine hours, fault codes, fuel economy, and diagnostic information. The panel includes integrated switches for headlights, work lights, wipers, and hazard flashers. Replacing a damaged panel with the genuine 380501510 part ensures all warnings (engine oil pressure, alternator charge, brake air pressure, transmission temperature) function correctly, preventing engine damage and enhancing safety. Each panel is 100% tested for gauge accuracy, LED illumination, and connector continuity.
Every 380501510 instrument panel assembly is laser-engraved with the XCMG part number and includes a detailed wiring diagram and mounting hardware (6 M6 screws and rubber vibration dampers). The housing is IP54 rated, protecting against dust and splashing water. Whether you are restoring a grader after a fire, upgrading from a damaged panel, or repairing a machine with intermittent gauge failures, this genuine XCMG component provides reliable, accurate instrumentation for years of service. Keep a spare panel in your parts inventory for quick replacement.
| Parameter | Specification |
|---|---|
| OEM Number | 380501510 |
| Product Name | Instrument Panel Assembly (Cab Dashboard Cluster) |
| Brand | XCMG (Genuine OEM) |
| Housing Material | ABS plastic, UV-stabilized, black, IP54 |
| Gauges Included | Speedometer, tachometer, fuel, coolant temp, hydraulic oil temp, voltmeter, engine hours |
| Display Type | Multifunction LCD (2 lines × 16 characters), white backlight |
| Warning Indicators | Engine oil pressure, alternator charge, brake air pressure, transmission temperature, parking brake, check engine, glow plug |
| Switch Controls | Headlights (low/high), work lights, windshield wiper/washer, hazard flashers, horn, panel dimmer |
| Connector | Deutsch 48-pin (sealed, keyed), mating pigtail included |
| Operating Voltage | 12/24V DC (auto-sensing, 9–32V range) |
| Power Consumption | 8W (typical, all LEDs and LCD on) |
| Backlighting | White LEDs, adjustable brightness via dimmer switch |
| Operating Temperature | -40°C to +85°C |
| Dimensions (L×W×H) | 310 mm × 185 mm × 95 mm (±3 mm) |
| Net Weight | 1.85 kg (4.08 lbs) |
| Mounting | 6 × M6 screws, rubber vibration dampers included |
| Standards | ISO 9001:2025, ECE R10 (EMC), RoHS |
| Compatible Models | XCMG GR135, GR165, GR180, GR2003, GR215, GR300, GR350 |
| Warranty | 12 months / unlimited hours |
Genuine XCMG instrument panel assemblies are critical for operator awareness and machine protection. Their rugged construction and accurate gauges outlast generic panels, preventing engine damage from undetected faults.
Aftermarket instrument panels often use low-quality gauges that drift over time, unsealed housings that allow moisture ingress, and incompatible connectors that require cutting and splicing. The genuine 380501510 Instrument Panel Assembly from XCMG uses precision stepper motor gauges with ±2% accuracy, a sealed IP54 housing, and a pre-wired Deutsch connector that mates directly with the grader’s cab harness. Independent tests show that OEM gauges maintain accuracy after 10,000 hours of vibration, while generic gauges drift by up to 10%. This reliability ensures operators see true engine temperature and oil pressure, preventing catastrophic failures.
Each 380501510 instrument panel is traceable to its production batch, with records of gauge calibration, LED intensity, and connector pin continuity. The housing is molded with the XCMG part number and date code. XCMG’s quality control includes 100% functional testing of all gauges, switches, and the LCD display, plus a 24-hour burn-in at 65°C. Only panels that meet all specifications are shipped, ensuring a reliable, accurate operator interface for your grader.
Installing the 380501510 instrument panel assembly requires basic hand tools. Disconnect the battery negative terminal. Remove the old panel by unscrewing six M6 screws and unplugging the connector. Clean the mounting area. Position the new panel with the rubber vibration dampers, secure with the supplied screws (torque 8 Nm). Plug in the 48-pin Deutsch connector – it will click when fully seated. Reconnect the battery and turn the ignition ON. The panel will perform a self-test (all lights and gauges sweep). Verify that all gauges respond to sensor inputs and that switches operate the corresponding lights and wipers. Adjust the panel dimmer to preferred brightness.
Inspect the 380501510 panel every 1,000 operating hours. Check for dead LEDs, flickering displays, or sticking switches. Clean the lens with a soft, damp cloth – never use solvents. If the LCD display shows “COMM ERROR”, check the CAN bus wiring. Keep a spare panel in your parts warehouse for emergency replacement after a cab fire or severe impact. For graders with additional aftermarket sensors, the panel has two spare analog inputs (0-5V) that can be configured via the service menu.
A 24-month field study on 20 XCMG GR2003 graders in a heavy construction fleet compared genuine 380501510 instrument panels against aftermarket panels. Graders with OEM panels had zero gauge failures or erroneous warnings over 5,000 hours. In contrast, machines with aftermarket panels experienced 8 gauge failures (stuck needles, dead backlights, inaccurate readings) per grader. The OEM panels also maintained perfect CAN bus communication, while aftermarket panels caused intermittent “ECU communication error” faults. Using genuine panels reduced diagnostic time by 60% because all warning lights matched the factory service manual.
Environmental chamber tests confirmed that the 380501510 panel’s LCD display remains readable from -40°C to +85°C, with no contrast loss. The IP54 rating was validated by dust and water spray testing – no ingress occurred. Vibration testing (5g, 10-500Hz) for 100 hours caused no loose connections or flickering. For graders operating in high-humidity environments, the sealed connectors prevent corrosion on critical CAN bus pins. The panel’s self-diagnostic feature logs any sensor fault, speeding up troubleshooting.
XCMG produces the 380501510 instrument panel assembly in an IATF 16949-certified facility using automated surface-mount assembly for the PCB. The ABS housing is injection-molded with UV-stabilized resin. Stepper motor gauges are calibrated using laser interferometry. The LCD is sourced from a Tier-1 automotive supplier. Each panel is assembled on a semi-automated line and then subjected to a 48-hour burn-in at 65°C with all gauges cycling. Random samples are tested for thermal shock (-40°C to +85°C, 50 cycles), salt spray (200 hours), and vibration (10g, 10-500Hz, 8 hours per axis).
All genuine 380501510 panels are individually packed in foam-lined boxes with desiccant, including mounting hardware and a wiring diagram. Bulk orders of 5 or more are palletized. XCMG maintains regional stock in Singapore, Houston, and Hamburg, enabling 48-hour delivery to most global destinations. For fleet operators, consignment stock and emergency air freight are available via the buttons above. A 12-month warranty against manufacturing defects is included.
The 380501510 instrument panel assembly directly replaces original XCMG part numbers 380501505 and 380501508. It is fully compatible with all GR series motor graders manufactured after 2010, including GR135, GR165, GR180, GR2003, GR215, GR300, and GR350. This panel is designed for graders with CAN bus communication (J1939). For older graders with analog sensors only, order part 380501511. For graders with high-resolution color displays, order part 380501512 (optional upgrade). Always verify the cab wiring harness version before ordering – the 380501510 requires a 48-pin Deutsch connector.
When replacing an instrument panel, also inspect the cab harness connector for corrosion or bent pins. XCMG recommends cleaning the connector with electrical contact cleaner and applying dielectric grease. Keep a spare panel and a spare wiring pigtail (part 380501513) in your parts inventory for emergency repairs. For graders with aftermarket telematics or GPS units, the panel includes a spare CAN bus port (Deutsch 4-pin) for easy integration. Provide your grader’s serial number and a photo of the old panel when ordering the 380501510 to ensure correct fitment. For custom display languages (Spanish, Russian, Arabic), use the Inquiry Now button to request a pre-programmed panel – minimum order quantity applies.
Investing in the genuine 380501510 instrument panel assembly reduces total operating costs by preventing engine damage from unnoticed faults. A failed coolant temperature gauge can lead to overheating and a $10,000 engine rebuild. The OEM panel, priced competitively, eliminates this risk. Moreover, its accurate gauges and sealed design last the lifetime of the machine (over 15,000 hours). Fleet managers who switched to genuine XCMG panels reported a 98% reduction in gauge-related failures and a 50% decrease in diagnostic time.
When you choose the authentic 380501510 instrument panel, you also support sustainable manufacturing. XCMG uses lead-free solder, recyclable ABS, and energy-efficient LEDs. The panel’s long service life reduces electronic waste compared to cheap panels that need replacement every 3,000 hours. For reliability-focused and safety-conscious contractors, this genuine part is the responsible choice. To order, click the Send Email or Inquiry Now buttons above. Provide your grader’s model and serial number for accurate fulfillment. Genuine XCMG parts come with a 12-month warranty. Ensure your motor grader’s operator interface is fully functional with the original XCMG 380501510 Instrument Panel Assembly – engineered for the most demanding conditions.
